Eddy Current Testing Course

What is Eddy Current Testing?

Eddy current testing is a non-contact electromagnetic testing technique used for the inspection of conductive materials without the need to remove non-conductive coatings. An alternating current is passed through a coil in order to create an alternating magnetic field which is used to induce a localised current (eddy current) into the material under test. Discontinuities such as fatigue cracks will interrupt the flow of eddy currents and alter the terminal impedance of the test coil. The amplitude and phase of the received signal can be interpreted to ascertain the severity and exact location of any discontinuities found. Eddy current is routinely used to inspect a wide range of different materials and components across several fields of engineering including oil and gas, nuclear, power generation and aerospace.

What are the responsibilities of a individual who is certified to Eddy Current Level 2?

An individual certified to Eddy Current Level 2 has demonstrated competence to perform NDT according to Eddy Current testing procedures. Within the scope of the competence defined on the certificate, Level 2 personnel may be authorised by the employer to:

  • Select the Eddy Current technique for the test method to be used
  • Define the limitations of application of the testing method
  • Translate NDT codes, standards, specifications and procedures into NDT instructions adapted to the actual working conditions
  • Set up and verify equipment settings
  • Perform and supervise tests
  • Interpret and evaluate results according to applicable standards, codes, specifications or procedures
  • Prepare Eddy Current written instruction
  • Carry out and supervise all tasks at or below level 2
  • Provide guidance for personnel at or below level 2
  • Report the results of Eddy Current test
Contact us today to book your course

Days: 4 days training and 1 day exam or 9 days training and 1 day exam (direct to Level 2)
Duration: 40 hours or 80 hours (direct to level 2)

These courses are run by Ultramag Inspection Services but all examinations are conducted by IMechE Argyll Ruane.